Main Floor:
1.361 sq. ftUpper Floor:
759 sq. ftLower Floor:
Heated Area:
2,120 sq. ft.Width:
47'4"Depth:
54'4"Bedrooms:
3Bathrooms:
2 1/2Stories:
twoAdditional Rooms:
recreation room, laundry roomGarage:
2 car optionalOutdoor Spaces:
porch combined 400 sq. ft, screen porch, covered porch, grill deck, stoopOther:
open living, stone fireplace, first floor master suite, boat garageRoof:
11'2Exterior Framing:
2x4 or 2x6Ceiling Height:
9', vaulted family room, kitchen and dining roomHome Style:
Craftsman, Cottage, LakeLot Style:
sloping lotWedowee Creek Retreat is perfect for a relaxing getaway at the lake. The main level is vaulted creating amazing views throughout the house. All rooms but the master are vaulted creating a very open feel. A lack of interior walls and vaulted ceilings allow you to live large in a smaller house. There is a covered and screened porch located on the left side of the house that allow you to enjoy the views of your lot. The lower level comes with a recreation room, two vaulted bedrooms and a accessible boat garage with plenty of room for storage. An optional garage comes with the plan and is attached to the house by a grill deck.
Each set of plans includes:
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.