The Runaway
Floor Plans:
House Plan Specs
Main Floor:
927 sq. ftUpper Floor:
616 sq. ftLower Floor:
Heated Area:
1,543 sq. ft.
Total Living Area:
Width:
42'Depth:
40'
Plan Dimensions:
-
Bedrooms:
3 -
Bathrooms:
2 1/2 -
Stories:
two -
Additional Rooms:
lake storage -
Garage:
none -
Outdoor Spaces:
front porch, open deck -
Other:
stone fireplace, open living, jack and jill bath
House Features
-
Roof:
11'2 -
Exterior Framing:
2x4 or 2x6 -
Ceiling Height:
9'
Plan Features
-
Home Style:
Small Cabin, Cottage, Lakefront -
Lot Style:
small lot, narrow lot
Plan Styles
The Runaway is a small 3 bedroom lake cabin with porches that we built at Lake Wedowee in Alabama. It will work great at the lake or in the mountains. You enter the house on a spacious front porch that wraps around and has access to the family room with a fireplace as well as the master suite. The family room has a stone fireplace and an open kitchen / breakfast area. The upper level has two bedrooms both with great views out of the rooms.
Each set of plans includes:
Elevations
Floor Plans
Foundation Plan
Roof Plan
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.
Houzz
Connect With Us
Like us on Facebook to see new plans and pictures: