Residential House Plans
Autumn Place
Floor Plans:
House Plan Specs
Main Floor:
1,250 sq. ftUpper Floor:
noneLower Floor:
1,097 sq. ftHeated Area:
2,347 sq. ft.
Total Living Area:
Width:
38'Depth:
50'8"
Plan Dimensions:
-
Bedrooms:
3 -
Bathrooms:
2 1/2 -
Stories:
two -
Additional Rooms:
recreational room -
Garage:
none -
Outdoor Spaces:
covered porch, screened porch, front porch, grill deck -
Other:
main level master, outdoor fireplace, butler walk-in pantry
House Features
-
Roof:
-
Exterior Framing:
2x4 or 2x6 -
Ceiling Height:
9', vaulted family room
Plan Features
-
Home Style:
Cottage, Lake, Corner Lot -
Lot Style:
sloping, lake, mountain, narrow lot
Plan Styles
Autumn Place is a small cottage house plan with a walkout basement that will work great at the lake or in the mountains. You enter the foyer to a vaulted family, kitchen and dining room. The family room shares a double-sided fireplace with the screened in porch on the right side of the home that is connected to a covered porch and grill deck on the rear. A dining room surrounded by windows allows you to enjoy the views of your lot and your food simultaneously. The master suite has a walk-in closet, master bath and access to the screened in porch with a fireplace. The lower level has a recreation room for entertainment and plenty of sleeping room for family and friends – two bedrooms and a wall of bunk beds.
Each set of plans includes:
Elevations
Floor Plans
Foundation Plan
Roof Plan
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.
More House Plans
Houzz
Connect With Us
Like us on Facebook to see new plans and pictures: