Appalachian Mountain III
Floor Plans:
House Plan Specs
Main Floor:
1989 Sq. Ft.Upper Floor:
noneLower Floor:
optional 1989 Sq. Ft.Heated Area:
1989 Sq. Ft.
Total Living Area:
Width:
87' 2"Depth:
56' 10"
Plan Dimensions:
-
Bedrooms:
4 -
Bathrooms:
3 1/2 -
Stories:
2 -
Additional Rooms:
Mechanical Room, Recreation Room, Bunk Room, Flex Room -
Garage:
2 car -
Outdoor Spaces:
Front Porch, Open Deck, Screened Porch, Breezeway, Covered Porch -
Other:
Walkout Basement, Covered Terrace
House Features
-
Roof:
11' 2 -
Exterior Framing:
2x4 or 2x6 -
Ceiling Height:
9', Vaulted Family Room, Vaulted Master Suite, Vaulted Screened Porch, Vaulted bedroom
Plan Features
-
Home Style:
Rustic, Lake, Mountain, Craftsman -
Lot Style:
sloping mountain or lake
Plan Styles
The Appalachian Mountain III is a two story open living floor plan mountain or lake house design with a walkout basement. It is a version of our popular Appalachia Mountain with a 2 car garage. You enter the home to a vaulted open great room allowing you to dine, cook and relax while still enjoying the company of your loved ones. The rear wall is covered in windows allowing natural light into the home as well as creating spectacular views of your lot. The main level has two guest rooms and a vaulted master bedroom with access to the covered gazebo porch on the rear of the home. The lower level can be finished or left unfinished and features a recreation room, two guest bedrooms, an exercise room and a lake storage garage on the side of the home.
Each set of plans includes:
Elevations
Floor Plans
Foundation Plan
Roof Plan
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.
More House Plans
Houzz
Connect With Us
Like us on Facebook to see new plans and pictures: