Residential House Plans
Main Floor:
2,179 sq. ftUpper Floor:
1,129 sq. ftLower Floor:
noneHeated Area:
3,308 sq. ft.Width:
60'Depth:
68'10"Bedrooms:
4Bathrooms:
3 1/2Stories:
2Additional Rooms:
1st floor master, study, keeping room, study loftGarage:
2 carOutdoor Spaces:
front porch, rear deckOther:
storage, coffered ceiling family room, cathedral ceiling master bedroomRoof:
Exterior Framing:
2x4 or 2x6Ceiling Height:
9'Home Style:
Lake, Rustic, BrickLot Style:
sloping lot, lake lotLake Burton Lodge is a 4 bedroom house plan with the master bedroom on the main level and 3 bedrooms on the upper level floor plan. This home design can work great as a primary or vacation home. The exterior is constructed with a mixture of rock, shake and brick. You enter the foyer to a coffered family room with a fireplace and access to the rear deck. The kitchen is open to the breakfast and vaulted keeping room with a fireplace. The master suite has a master bath, spacious walk-in closet and access to the rear porch. A two car garage is conveniently located near the stairs and the kitchen for unloading groceries. The upper level has two bedrooms, a bonus room, a study room and plenty of storage space.
Each set of plans includes:
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.