Chimney Top
Floor Plans:
House Plan Specs
Main Floor:
1,689 sq. ftUpper Floor:
noneLower Floor:
1,689 sq. ftHeated Area:
3,378 Sq. Ft.
Total Living Area:
Width:
48'8"Depth:
55'
Plan Dimensions:
-
Bedrooms:
4 -
Bathrooms:
3 -
Stories:
2 -
Additional Rooms:
Game Room, Bunk Rooms -
Garage:
Golf Carage -
Outdoor Spaces:
Front Porch, Rear Screened Porch, Rear Open Deck, Rear Covered Porch -
Other:
Cathedral Ceiling in Family and Dining Room, 2 Master Rooms on main Level
House Features
-
Roof:
11'2 -
Exterior Framing:
2x4 or 2x6 -
Ceiling Height:
9'
Plan Features
-
Home Style:
Craftsman, Rustic, Mountain -
Lot Style:
Sloping Lot,
Plan Styles
Chimney Top is a two story 4 bedroom craftsman home design that will work great at the lake or in the mountains. You enter the floor plan to a vaulted kitchen/dining and great family room. It has two master suites on the main level with direct access to the covered porch for exceptional views. Windows on the rear wall of this home design provide great views to the rear deck. On the lower level floor plan there is a recreation room and bar area along with plenty of sleeping room for company. Rustic elements and craftsman details on the exterior of the home give it a true lake or mountain feel. Max designed this plan to be an open living floor plan allowing you to maximize your living areas while also cutting down on building costs.
Each set of plans includes:
Elevations
Floor Plans
Foundation Plan
Roof Plan
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.
More House Plans
Houzz
Connect With Us
Like us on Facebook to see new plans and pictures: