Main Floor:
1,209 sq. ftUpper Floor:
Lower Floor:
1,238 sq. ftHeated Area:
2,492 sq. ft.Width:
47'6"Depth:
56'Bedrooms:
3Bathrooms:
2 1/2Stories:
twoAdditional Rooms:
pool room, dressing roomGarage:
noneOutdoor Spaces:
front porch, vaulted covered gazebo, porch combined 644 sq. ftOther:
outdoor shower, open to below, open living, outdoor stone fireplaceRoof:
11'2Exterior Framing:
2x4 or 2x6Ceiling Height:
9', vaulted master bedroomHome Style:
Craftsman, Rustic, MountainLot Style:
sloping lotWolf Creek is a 2 story rustic lake house plan. You enter the foyer to views of the family room below. There are two bedrooms to the right that share a bath and also have views below from the hallway. The master suite in the back has a rear wall of windows so you can enjoy the views of the lake or your lot. A vaulted covered porch with a fireplace has access from the master suite and another bedroom. The terrace level is where all the excitement is with a kitchen, dining, family and recreation room for relaxing and hanging out with family and friends. A see through fireplace connecting the recreation and family room add to this extraordinary living area.
Each set of plans includes:
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.