Max Fulbright Designs

John's Creek

You are here: Home >> House Plans >> Brick House Plan
brick-house-plan-with-porches-johns-creek

Floor Plans:

Brick House Floor Plan Johns Creek
Brick Home Floor Plan Upper Level

House Plan Specs

    Total Living Area:

  • Main Floor:

    2,475 sq. ft

  • Upper Floor:

    375 sq. ft

  • Lower Floor:

    None

  • Heated Area:

    2,475 Sq. Ft.

    Plan Dimensions:

  • Width:

    63'

  • Depth:

    70'9"

    House Features

  • Bedrooms:

    4

  • Bathrooms:

    2 1/2

  • Stories:

    two

  • Additional Rooms:

    Bonus Room, Foyer, Study

  • Garage:

    2 car

  • Outdoor Spaces:

    Front Porch, Rear Porch

  • Other:

    1st Floor Master, Walk in Closet, Cathedral Ceiling

    Plan Features

  • Roof:

    11'2

  • Exterior Framing:

    2x4 or 2x6

  • Ceiling Height:

    9'

    Plan Styles

  • Home Style:

    Brick, Garage

  • Lot Style:

    Sloping Lot, Corner Lot

John’s Creek is a two car garage brick house plan. The foyer of the John’s Creek plan is flanked by a study on one side and a dining room, with tray ceiling on the other. The study has french doors and can double as a guest bedroom. The family room has a great view off the back of the house and has a 12 foot coffered ceiling. The kitchen and breakfast room are both open the the family room. The master suite has a tray ceiling, a walk in closet and a spacious bath with privacy room, soaking tub, separate vanities and a large shower. There are two other bedrooms and a jack and jill bath on the opposite side of the house from the master. A walk in pantry, a laundry room, and a 2 car garage complete the main level of this home.There is a bonus room over the garage. The lower level/basement can be finished to include a recreation room, wet bar, additional bedrooms and bath, and a theater room.There is a covered porch on the back of the house and a spacious deck can be added. Brick and board and batten are shown on the elevation but this house will look great with several different exterior materials.

Each set of plans includes:

Elevations

  • Front, side and rear elevations at 1/4 ” scale. All elevations include notes, dimensions, and recommended materials.

    • House Plan Front Elevation
    House Plan Left Elevation

    Floor Plans

  • Complete dimensioned and detailed Floor Plans.

    • Main Level Floor Plan
    Upper Level Floorplan

    Foundation Plan

    Lower Level Floor Plan

    Roof Plan

    House Roof Plan

    Notes:

  • Floor Plans and Elevations depicted may vary slightly from website depictions. Over time, we make plan improvements that may not be updated on the site immediately.
  • Square Footage is typically calculated using heated Square Footage on the main and upper levels. Stairs are counted once. Two story open areas and vaulted spaces are not included in Square Foot totals.
  • Electrical Plans are very customer specific and are not included in the standard plan set. The types of lights, switches, and where they are located vary with each customer. An on site meeting with the builder and electrician after the house is framed is the easiest way to make good decisions regarding electrical. However, we can produce custom electrical plans for $350.00.

    • All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.

    John’s Creek

    More House Plans

    Houzz

    Remodeling and Home Design

    Connect With Us

  • Facebook
  • Google Plus
  • Pinterest
  • Twitter
  • Houzz

    • Pin It on Pinterest

    Share This