River Bend
Floor Plans:
House Plan Specs
Main Floor:
1151 sq. ft.Upper Floor:
795 sq. ft.Lower Floor:
1151 sq. ft.Heated Area:
1,946 sq. ft.
Total Living Area:
Width:
49'Depth:
40'2"
Plan Dimensions:
-
Bedrooms:
3 -
Bathrooms:
3 1/2 -
Stories:
2 -
Additional Rooms:
Office, Game Room, Vaulted Family, Loft -
Garage:
2 Car -
Outdoor Spaces:
Porch, Grill Deck, Shower, Porch Fireplace -
Other:
Open family, kitchen and dining room, open loft, unfinished basement
House Features
-
Roof:
11'2 -
Exterior Framing:
2x4 or 2x6 -
Ceiling Height:
9'
Plan Features
-
Home Style:
Rustic, Lake, Mountain, Cottage, Small, Large, Modern, Temporary -
Lot Style:
Sloping, Narrow, Corner
Plan Styles
The Riverbend is a rustic style house plan with stone and porches. Its floor plan is very open with views from literally every room of the house. The foyer, kitchen, dining, and vaulted family room are all open to a wall of windows along the back of the house. Timbers and columns define the spaces and give the house a rustic yet formal feel. French doors open from the family room onto the screened porch and outdoor fireplace. The master suite has french doors that open onto a covered porch. The master bath features a walk in closet, a vanity big enough for single or double sinks, and a large shower. A golf cart garage, laundry closet, and half bath complete the main level. The upper level features an open loft that looks down into the family room below. The two upstairs bedrooms include window seat/beds and private baths. One of the upstairs bedrooms has french doors that open onto a private upper deck. The lower level/basement can be completed to include a recreation room, wet bar and additional bedroom and bath.The exterior is a mixture of craftsman details, stone, board and batten, and shake. A carport or garage can easily be added to the Riverbend.
Each set of plans includes:
Elevations
Floor Plans
Foundation Plan
Roof Plan
Notes:
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.
More House Plans
Houzz
Connect With Us
Like us on Facebook to see new plans and pictures: