Max Fulbright Designs

River's Walk

You are here: Home / House Plans / two story 4 bedroom house plan 3 car garage
two-story-house-plan-with-three-car-garage

Floor Plans:

3 car garage floor plan
Upper Level Floor Plan River's Walk

House Plan Specs

    Total Living Area:

  • Main Floor:

    1,513 sq. ft

  • Upper Floor:

    1,516 sq. ft

  • Lower Floor:

  • Heated Area:

    3,029 sq. ft.

    Plan Dimensions:

  • Width:

    56'2"

  • Depth:

    63'2"

    House Features

  • Bedrooms:

    4

  • Bathrooms:

    3 1/2

  • Stories:

    2

  • Additional Rooms:

  • Garage:

    3 car garage

  • Outdoor Spaces:

    Front Porch, Rear Porch

  • Other:

    upstairs master bedroom, open to below

    Plan Features

  • Roof:

    11'2

  • Exterior Framing:

    2x4 or 2x6

  • Ceiling Height:

    9', tray ceiling master bedroom

    Plan Styles

  • Home Style:

    Craftsman, Rustic, Family

  • Lot Style:

The Riverwalk is a great two story four bedroom home plan with a three car garage that works well in any setting. As you enter the Riverwalk, you’re in a grand two story foyer with views of the formal living and dining rooms on one side and the family room on the rear of the home. The two story family room is open to the kitchen and breakfast areas. A covered porch sits just outside the family room. A large covered front porch and a 3 car garage complete the main level. The upper level of the Riverwalk includes a spacious master suite with his and her walk in closets and a luxury bath. There are 3 additional bedrooms on this level. Two of the bedrooms share a Jack and Jill bath while one bedroom enjoys a private bath. The upstairs laundry room is convenient to all the bedrooms. Open railing overlooks the foyer and the family room.The optional unfinished basement provides plenty of room for a recreation room, a theater room, and extra bedrooms.

Each set of plans includes:

Elevations

  • Front, side and rear elevations at 1/4 ” scale. All elevations include notes, dimensions, and recommended materials.

    • House Plan Front Elevation
    House Plan Left Elevation

    Floor Plans

  • Complete dimensioned and detailed Floor Plans.

    • Main Level Floor Plan
    Upper Level Floorplan

    Foundation Plan

    Lower Level Floor Plan

    Roof Plan

    House Roof Plan

    Notes:

  • Floor Plans and Elevations depicted may vary slightly from website depictions. Over time, we make plan improvements that may not be updated on the site immediately.
  • Square Footage is typically calculated using heated Square Footage on the main and upper levels. Stairs are counted once. Two story open areas and vaulted spaces are not included in Square Foot totals.
  • Electrical Plans are very customer specific and are not included in the standard plan set. The types of lights, switches, and where they are located vary with each customer. An on site meeting with the builder and electrician after the house is framed is the easiest way to make good decisions regarding electrical. However, we can produce custom electrical plans for $350.00.

    • All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process. All house plans from maxhouseplans are designed to conform to the local codes when and where the original house was constructed. In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance. In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well as some other areas. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit. Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping.

    River’s Walk

    More House Plans

    Houzz

    Remodeling and Home Design

    Connect With Us

  • Facebook
  • Google Plus
  • Pinterest
  • Twitter
  • Houzz

    • Pin It on Pinterest

    Share This